I have written about Streamripper before (removed the older post as is was out of date), it’s an interesting little application that I use now and then. I originally wrote about compiling it back on OS 10.5 Leopard, at that time the current version was a bit busted but in the end I got it to work and posted the details here. Times have changed and software changes so I thought I would update the world on my use of Streamripper. After all the messing about I had with the 1.62.x range of Streamripper I had settled on using 1.61.27 with security patches. I used this for quite a while, last year I thought I would checkout the newer versions of Streamripper and found that they had taken the great little tool and added a whole bunch of stuff that had a dependency on the glib2 library, which is massive when you just want a single little tool. I suppose it’s ok if you are running on a Linux box where you have glib2 installed as it gets used by lots of applications, but on other platforms it’s just overkill and I can’t be bothered with it.

With this I mind I got the source code for the last of the standalone versions 1.62.3, it does everything, and doesn’t have a massive dependency problem like the recent versions. I made a small change to the source, compiled it and life is good again, much easier than compiling for 10.5 and all that bag of hurt of the older versions :)

The reason I have suddenly posted this is I have just re-compiled Streamripper for Snow Leopard using the new Clang and LLVM-GCC compilers. As all of Snow Leopards utils are in x86-64 I did Streamripper as x86-64, a few years back I never thought I’d be compiling Streamripper as 64-Bit just seems overkill, but why not :)

I won’t bother with all the building stuff like my last post on the subject as it’s not that hard really.

Enjoy!

I really like the colours of the syntax highlighting in Apple’s XCode, I apply the colouring to all of the other code editing applications I use, these being Netbeans and BBEdit. For the 3.2.x versions there are only some small changes in the colours. With the advent of OS 10.6 Snow Leopard we get Apple’s new Menlo font which is very nice. Colour values were taken from XCode 3.2.3.

XCode Colours (RGB)
Selection: 167, 201, 255
Comments: 0, 116, 0
Documentation Comments: 0, 116, 0
Documentation Comments Keywords: 2, 61, 16
Strings: 196, 26, 22
Characters: 28, 0, 207
Numbers: 28, 0, 207
Keywords: 170, 13, 145
Pre-Processor Statements: 100, 56, 32
URLs: 14, 14, 225
Attributes: 131, 108, 40
Project Class Names: 63, 110, 116
Project Functions and Method Names: 38, 71, 75
Project Constants: 38, 71, 75
Project Type Names: 63, 110, 116
Project Instance Variables and Globals: 63, 110, 116

Default font: Menlo 11

On Mac OS X 10.5 the default compiler is GCC 4.0.1, Apple does provide GCC 4.2.1 as part of the XCode Developer Tools releases for 10.5 but it isn’t setup as the default.

The main tools are located in /usr/bin. In this folder you will find both gcc 4.0 and 4.2 along with g++ 4.0 and 4.2. The commands gcc, g++, cc, and gcov are all symbolic links to the default 4.0 versions. To make 4.2 the default we just need to modify the symbolic links.

To do this we need to go in to the Terminal and issue the following commands:

Now you should have a complete working gcc 4.2.1 tool chain. If there is a problem you can verify the symbolic links are pointing at the correct targets by typing ls -l Hope this helps someone else.

I’ve been having some rather odd Safari problems today for the first time since I can remember. I really dig Safari, it’s everything I want in a browser and getting better with each release. I’ve been using Safari since the public beta back in January 2003 back when Mac OS X 10.2 was the main OS.

Anyway this afternoon I noticed that Safari kept using 100% CPU and becoming un responsive. I kept force quitting it but the problem kept coming back after about 10 mins. I tried the usual repair permissions, delete preferences and caches etc to no avail. I then thought I would try the Safari 4 Developer Preview, I downloaded it and installed it. It was perfectly stable and very fast, can’t wait for the finial release of that badboy! At this point I was still stumped as to why 3.2.1 was holding the CPU hostage but Safari 4 was fine. I uninstalled Safari 4 and reinstalled 3.2.1.. On restarting everything seemed fine but yet again it took all the CPU, back where I started. Just launching Safari and then closing the window and waiting would cause the CPU to be held hostage again.

I ran a filesystem trace to see what files Safari was touching, I basically sat and waited until the high CPU condition happened then took a look to see what files were accessed. After an hour of watching and timing the problem it seemed that Safari was continuously reading from the filesystem which is what was causing the massive CPU load. It was triggered by an unusual cache file hit, I did a check to see what network connections were established and saw some odd looking google server addresses, it then dawned on me that Safari 3.2 features anti-phishing protection that uses a blacklist provided by google.

This also explained why the the Safari 4 Developer Preview worked correctly as it doesn’t yet have the anti-phishing stuff. I turned off the anti-phishing stuff in Safari 3.2.1 and sure enough everything went back to normal. Me being me I was still bothered because why would it suddenly cause problems, it’s been working fine until today. I went back and took a look at the cache files it was using for the blacklists, I thought that corruption of some kind was most likely so I deleted them. I then re-enabled the anti-phishing mode in Safari 3.2.1, now been three hours and all is well again.

Relaunch Safari and all should be well. I couldn’t find any references to this problem online so I though I would post something.

I thought I would check my old email account and got a nice total of 4124 messages! Every single one was junk. Apple Mail’s Junk mail filter caught 4122 of them so thats an accuracy of 99.95% very impressive! I thought I would dig a little deeper and ran a virus check on the emails, 37 were infected with various trojans, viruses, and general nasty spyware. Pretty interesting, I haven’t actively been using that account since about 2003 / early 2004, since then I haven’t sent anything from the account and have been looking now and then at what comes in, and from who. I think it’s time to forget that mailbox.

Well it’s only taken me a few years to get to version 1.0. I started my Phasecam widget back before Mac OS X 10.4 Tiger came out, around January 2005 from what I remember. Last year around Christmas I released a brand new rebuilt version which I did using the beta version of Dashcode. Well this year as a small Christmas present for my fellow Mac OS X users here is 1.0.

Whats New:

• Completely new Javascript.
• Links checked and fixed, some removed and new ones added.
• More Update options.
• Updated looks and Phasenoise logos.
• Smaller Download

Merry Christmas!

Not too sure about all this stuff, DRM Free is a good move, and also seeing the quality increase to 256K AAC is pretty good. Now the downside, the price hike from 79p to 99p for what they are calling premium versions. To start with they will be offering an upgrade option for the EMI tracks you already own, of course your gonna have to pay extra for that also.

The whole way through they kept mentioning that they are not offering anything that is not available already on CD. So lets look at the case for CD, you can get a CD cheaper from Amazon than buying the download, you get whatever quality you want to encode the tracks at, all the tracks are DRM free, you get a nice CD and case and art work. You can play your CD on your Hi-Fi car stereo etc… if your iPod or other player or computer gets stolen you can just re-encode from the CD.

CD is the clear winner, downloads only represent a small percentage of the market and the CD offers better quality and all the options you want. So why are they all going mad about advertising downloads? Well the record companies can make more money by getting rid of the overhead of physical media and distribution costs and keeping them for themselves, they can sell you a compressed format and a few years later offer you a better quality for a new price. The only store that had the right idea for downloads is Warp Records that have been offering all bitrate qualities including Lossless formats and all DRM free for the same price and a few pence more for the CD. They have been doing this for years and seems like the best thing to be doing. With the huge amounts of storage and large amounts of bandwidth we have lossless shouldn’t be a problem.

Buy the CD in the first place and you can have it anyway you want it for less!

Don’t get me wrong this is a great new step but CD is still king!

Setting Up Virgin GPRS Mac OS X Panther (10.3) & Tiger (10.4)
Sony Ericcson phones.

First start off by downloading some nice new modem scripts for Sony Ericcson phones by Ross Barkman. Follow the instructions for installation. These can be found here http://www.taniwha.org.uk/

Once you have installed the scripts follow the list below.

1. Open “System Preferences” select the “Network” button and on the top pop-up menu select “New Location” give it a name like “Mobile” or “Mobile GPRS” etc…

2. Select the Location you just created then click the “Show” pop-up menu and select the “Bluetooth Modem”.

3. Enter the service provider in the field in this case it’s Virgin.

4. In Account Name enter user leave the password field blank.

5. In the Telephone Number field enter goto.virginmobile.uk

6. Click on the button named “PPP Options” and deselect any items under the “Advanced Options” section then click “OK”

7. Click the tab named “Bluetooth Modem” and select the script you need i.e “Sony Ericcson GPRS CID2″ and your done.

8. you can switch your location either by using the Network setting in the System Preferences or by using the Location selector under the Apple Menu.

YOUR DONE!

In some cases you CID might not be 2 so check which you are using. In most cases for virgin it will be 2. You can also use the CID2 +CGQREQ script.